Cel-Fi Roam R41 Smart Repeater - Caravan & Marine Kit

Key Features

• Caravan/Marine/RV Kit

• Complete package with a CD8197 Folding Kit, Cel Fi Roam R41 f& 2dBi Stick On Panel Antenna for the Output of the Coverage

• Telstra, Optus and Vodafone (approval pending) Support

• Switchable between the Carriers

• 3G / 4G and 5G Support

  • 5G Upgrades Down the Track - This unit does not support current 5G N78 Services

• Supports 1 Frequency Band at a Time:

  • LTE B28, LTE/ 3G/LTE B5, LTE/3G B8, LTE B3,  LTE B1 & LTE B7 

  • Frequencies: 700 MHz, 850 MHz, 900MHz, 1800 MHz, 2100MHz, 2600MHz 

• Automatically selects the overall best frequency

• Inline amplifier - Extended Range Compared to the original Cel Fi Go

Usage

• The Cel Fi Roam R41 Repeater for the Telstra or Optus or Vodafone networks is a convenient way to boost and distribute a 3G / 4G / 5G mobile signal within your RV / Caravan / Camper / Boat

• Installing this device in your vehicle can improve the reliability of phone calls, text messages, data and increase 3G or 4G or 5G services

• This is a complete repeater system designed to provide coverage within and around the Vehicle / Vessel. 

• The wideband spring-based whip antenna is ideally suited for this type of set up as it offers 7.5dBi gain across the low band 3G and 4G frequencies

• The Fold Down antenna is connected to the repeater via a 5m RG58 tail (which can be extended) with an adapted fitting to connect directly onto the Cel Fi Go’s input connector. A Small Stick On T-Bar Antenna is then connected to the Cel Fi Roam’s output in order to disburse the captured signal

• The repeater provides enough boost to create a 10-20m radius of coverage around the vehicle / vessel.

• It's important to note that this repeater unit is designed to provide 3G or 4G services to mobile devices, it cannot produce both networks concurrently. 

Installation

• Professional installation recommended for vehicles

• It is possible to self-install the Cel-Fi Roam inside your vehicle/vessel, however, you must ensure the internal and external antennas are isolated

• To achieve the appropriate levels of isolation, it's generally recommended that the external antenna is be situated 5m away from the internal output antenna

• Cel-Fi Roam can cause interference to your vehicle electronic systems, so we strongly recommend professional installation to make sure you get the best from this product.