Icom IC-410-PRO

[Close]
Please note that Telco Antennas will be closed for the Christmas Holiday period from 11am on Friday the 20th of December through till Monday the 6th of January, opening again from 8:30am onwards.

The last day Orders will be despatched will be Thursday the 19th of December.

(IC-410-PRO)

1W / 5W / 25W Output Power

5W output power (CB). Approved for 25W when using licensed private/commercial frequencies within 450-520MHz*

*ACMA Licensed users only

80+ Channels

80 Channel UHF CB* plus up to 35 Private Channels.**

*80 Channel UHF CB, 61-63 not present, reserved for future use.

**Must be enabled using CS-410PRO software.

Active Noise Cancel Microphone

This feature allows clear communication by reducing the surrounding noise, especially the unwanted low frequency noise received by the microphone.

CB / Commercial Use

The Compact and Rugged construction makes this product ideal for use in
Commercial environments.

Other Features

Easy to see White backlit LCD display
Exclusive automatic repeater scan easily finds local repeaters
Rugged MIL SPEC construction provides shock & vibration resistance
Silent Stand-by with CTCSS & Selcall
Front mounted speaker for clear sound

General

			IC-410PRO
Frequency coverage			476.4250 - 477.4125 MHz (CB) 450.0000 - 520.0000 MHz (LMR)
Number of channels			128 Ch
Type of emission			CB : 8K50F3E (12.5 kHz) LMR: 8K50F3E (12.5 kHz) / 16K0F3E (25 kHz)
Antenna impedance			50 Ω nominal
Operating temperature range			- 30℃ to +60℃
Power supply voltage			13.8 V DC
Current drain (approx.)	Tx	25 W	7.0 A
	Tx	5 W	4.0 A
	Rx	Max. audio	1200 mA
	Rx	Stand-by	300 mA
Dimensions (projections not included; W×H×D)			150×40×117.5 mm
Weight (approx.)			0.8kg

Transmitter

	IC-410PRO
RF output power	5W / 1W (CB) 25 / 5W / 1W (LMR)
Modulation	Variable reactancne frequency modulation
Maximum permissible deviation	±2.5 kHz (Narrow) ±5.0 kHz (Wide)
Frequency error	±2.50 ppm

Receiver

	IC-410PRO
Sensitivity at 12dB SINAD	0.25 μV typ.
Audio output power	4.0 W typ. at 5 % distortion with 4 Ω load

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL-810 F Method, Proc.
Low Pressure Storage	500.4 I
Low Pressure Operation	500.4 II
High Temperature Storage	501.4 I
High Temperature Operation	501.4 II
Low Temperature Storage	502.4 I
Low Temperature Operation	502.4 II
Temperature Shock	503.4 I
Solar Radiation	505.4 I
Humidity Induced	507.4
Settling Dust	510.4 III
Vibration	514.5 I
Shock Functional	516.5 I
Shock Transit Drop	516.5 IV