Optus Repeater Kit for Caravan, RV & Marine
Cel Fi Go32 & Antenna Set Up for the Optus Network
SKU: CFG2-O-MAM-KIT
Cel-Fi GO G32 Smart Signal Booster for the Optus Network - Caravan & Marine Kit
Key Features
-
Specifically designed for Caravan Marine & RV Applications
-
Includes the CD7197 Folding Kit, Cel Fi Go for the Optus Network and 2dBi Stick On Panel Antenna for coverage output
-
Compatible with the Optus 3G / 4G Network
-
Supported frequencies - 3G 900 or 2100MHz / 4G 1800 or 2100 or 2600MHz (manual selection)
-
Suitable for Optus, Amaysim, Dodo, iiNet, plus more
-
Bluetooth WAVE App for iPhone, Android and computers
Usage
-
The Cel Fi Go Repeater for the Optus network is a convenient way to boost and distribute a 3G/4G/ mobile signal within your RV, caravan, camper or boat
-
Installing this device in your vehicle can improve the reliability of phone calls, text messages, and increase 3G or 4G services
-
This is a complete repeater system that provides coverage within and around the vehicle or vessel
-
The wideband spring-based whip antenna is ideally suited for this type of set up as it offers 7.5dBi gain across the low band 3G and 4G frequencies
-
The repeater provides enough boost to create a 10-20m radius of coverage around the vehicle / vessel.
-
It's important to note that this repeater unit is designed to provide 3G or 4G services to mobile devices, it cannot produce both networks concurrently
-
The fold down antenna is connected to the repeater via a 5m RG58 tail (which can be extended) with an adapted fitting to connect directly onto the Cel Fi Go’s input connector
-
A small stick on T-Bar antenna is then connected to the Cel Fi Go’s output in order to disburse the captured signal.
Installation
-
Professional installation is recommended for vehicles and vessels
-
It's possible to self-install the Cel-Fi GO inside your vehicle, however, you must ensure the internal and external antennas are isolated
-
To achieve the appropriate levels of isolation, it's generally recommended that the external antenna is situated 5m away from the internal output antenna
-
Cel-Fi GO can cause interference to your vehicle electronic systems, so we strongly recommend professional installation to make sure you get the best from this product.
Why is it legal?
-
Many mobile service providers do not support personal repeaters on their network. This is due to the interference they can cause when connected to the network, or when they are setup incorrectly
-
The Cel-Fi system is the only personal repeater that is widely approved by carriers in Australia
-
The Cel Fi Go is different to a standard repeater, as it was designed to provide maximum coverage, be network friendly, and is easily installed by the end user. It does this by:
-
continuously monitoring power levels of the cell tower it is connected to, and constantly adjusting its output power to suit the levels
-
only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band
-
giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station
-
not interfering with the carrier’s network or other users on the network
-
having a unique installation process to eliminate feedback into the mobile network.
-
A heads up!
- Optus's Cel Fi Go2 will not boost the 4G+ regional network.
(CFG2-O-MAM-KIT)
SKU | CFG2-O-MAM-KIT |
Shipping Weight | 5.0000kg |
Shipping Width | 1.400m |
Shipping Height | 0.300m |
Shipping Length | 0.300m |
Shipping Cubic | 0.126000000m3 |