Cisco EHWIC-4G-LTE-G Patch Lead

 

Key Features

 

  • TNC Male to FME Male

  • High quality connector

  • 15cm RG316 low loss 2.5mm patch cable

  • The EHWIC-4G-LTE-G has been successfully operated on the Telstra 4G network

  • WhirlTo find out more about configuring the US EHWIC-4G-LTE-G mobile card, this Whirlpool discussion forum is helpful.

 

What does a patch lead do?

 

  • Most antenna cables terminate with a standard connection, most commonly a female 'FME' connector

  • To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector that will plug into the antenna port on your device.

 

Which connector type do I need?

 

  • We offer the standard FME connector that you'll find on 90% of antenna cables, and the less common SMA connector

  • The following images will help you identify which connector your antenna cable has, and subsequently what patch lead you require

  • If you don't have an antenna yet, you can find the connector your antenna will have at the bottom of its description.


(TNC-EHWIC)

SKU TNC-EHWIC
Shipping Weight 0.0450kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.300m
Shipping Cubic 0.000750000m3