NetComm 4G100WV 4G Gateway Patch Lead
Key Features
-
Connects the USB modem to your antenna (FME Male).
-
High quality Hirose MS-147 connector
-
30cm of RG174 cable
-
Helps boost signal strength and speed of your LTE 100Mbps rated device
-
NetComm 4G100WV mobile broadband gateway has two antenna ports. You will require two patch leads when operating on Telstra 4G.
Why use an external antenna?
-
Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet
-
If you're in a rural, hilly, low signal area, or you can't get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way, when an external antenna is often all you need.
What does a patch lead do?
-
Most antenna cables terminate with a standard connection - most commonly a female 'FME' connector
-
To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector, that will plug into the antenna port on your device.
NetComm 4G100WV Gateway External Antenna
-
The 4G100WV modem/router uses a MIMO technology
-
This technology uses two antennas to theoretically double your speed in selected areas
-
To check whether your area is MIMO enabled, or to learn more about the Telstra 4G network, use our Telstra coverage map.
Which connector type do I need?
-
We offer both the standard FME connector that you will find on 90% of antenna cables, and the less common SMA connector
-
The following images will help you identify which connector your antenna cable has, and consequently what patch lead you require
-
If you don't have an antenna yet, you can find the connector your antenna needs at the bottom of its description.
(MS147-4G100WV)
SKU | MS147-4G100WV |
Shipping Weight | 0.0450kg |
Shipping Width | 0.050m |
Shipping Height | 0.050m |
Shipping Length | 0.300m |
Shipping Cubic | 0.000750000m3 |