Telstra Prepaid 3G WiFi USB Patch Lead (ZTE MF70)

 

Key Features

 

  • Connects the USB modem to your antenna (FME Male).

  • Highest quality & best fitting connector on the market

  • 15cm of C74 cable

  • Helps boost signal strength and speed of your Telstra prepaid device

 

Why use an external antenna?

 

  • Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet

  • If you're in a rural, hilly, low signal area, or you can't get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way, when an external antenna is often all you need.

 

What does a patch lead do?

 

  • Most antenna cables terminate with a standard connection, most commonly a female 'FME' connector

  • To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector that will plug into the antenna port on your device.

 

Telstra ZTE MF70 external antenna patch cable Tight fitting patch lead for Telstra and Bigpond Ultimate FME to TS-9 antenna connections

 

Which connector type do I need?

 

  • We offer both the standard FME connector that you will find on 90% of antenna cables, and the less common SMA connector sometimes used

  • The following images will help you identify which connector your antenna cable has, and consequently what patch lead you require

  • If you don't yet have an antenna, you can find the connector your antenna will need at the bottom of its description.



FME patch lead vs SMA patch cable

 

 

(TS9-FMEM-316)

SKU TS9-FMEM-316
Shipping Weight 0.0450kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.300m
Shipping Cubic 0.000750000m3